Description
Eliminate the embarrassment of getting caught up in wires on stage or in front of a crowd. You don’t want to fall in front of a bunch of people! Fix that problems and get a Digital Wireless system. You don’t want just any wireless system, you want a high quality, easy to use wireless system. You need the Audio Technica ATW-1102 system 10 Wireless Hand held System. These hi-fi digital systems operate with advanced 24-bit operation in the 2.4GHz range. These systems are great for MI/live performances, fixed installation, public address, A/V rental homes, and places of worship. It is easy to setup and use and with just one button it will automatically determine and set the best available frequency. This is a great system when there are multiple wireless systems being used at the same time because it cuts down on interference and inter modulation It is everything you could want in a digital wireless system.
Features: -Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance -2.4 GHz range completely free from TV interference -Three levels of diversity assurance: frequency, time, & space -Automatic frequency selection for seamless, interference-free operation -Extremely easy operation with instantaneous channel selection, sync, and set-up -State-of-the-art digital receiver for reliable performance -Balanced XLR and unbalanced 1/4 output jacks with level control
Specs: OVERALL SYSTEM SPECIFICATIONS: Operating Frequencies: 2.4 GHz ISM band Dynamic Range: >109 dB (A-weighted), typical Total Harmonic Distortion: <0.05% typical Operating Range: 30 m (100') typical Open range environment with no interfering signals Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Frequency Response: 20 Hz to 20 kHz Depending on microphone type
RECEIVER SPECIFICATIONS: Receiving System: Diversity (frequency/time/space) Maximum Output Level: XLR, balanced: 0 dBV, 1/4″ (6.3 mm), unbalanced: +6 dBV Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 190.0 mm (7.48″) W x 46.2 mm (1.82″) H x 128.5 mm (5.06″) D Net Weight: 290 grams (10.2 oz) Accessory Included :Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS: RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector ,Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V Batteries: Two 1.5V AA not included Battery Life: >7 hours (alkaline) Depending on battery type and use pattern Dimensions: 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D Net Weight: 100 grams (3.5 oz) without batteries
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA not included Battery Life: >7 hours (alkaline) Depending on battery type and use pattern Dimensions: 254.8 mm (10.03″) long, 50.0 mm (1.97″) diameter Net Weight: 280 grams (9.9 oz) without batteries Accessory Included: AT8456a Quiet-Flex stand clamp
