Description
When you are at a gig or performance you tend to have a lot of equipment to plug in. You don’t want to run out of plugs and you don’t want a ton of extra chords getting in your way. With the Furman M8-X2 Power Conditioner you get eight switched outlets in the rear panel that will power and protect your equipment up to a 15 amp load. You can install it on the top slot of your rack mount to save room. It was not designed for applications when lights were involved.
Specs: Maximum Output Current: 15 amps Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating Voltage: 120VAC 60Hz Spike Protection Mode: Line to neutral Energy Dissipation: 170 joules Peak Impulse Current: 12,000 amps Maximum Continuous Operating Voltage: 130 VAC RMS Let Through Voltage (@ 125 amps, 8/20uS waveform): 400 volts Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz Dimensions: 1.75 H x 19 W x 3.75 D Weight: 4.9 lbs. Safety Agency Listing: cTUVus Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
Features: Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) 15 Amp Rating: 15 amp rating, with circuit breaker Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean “Protection OK” Indicator: Front panel indicator LED lets you know that your equipment is being protected 9 Total Outlets: 8 rear panel outlets and 1 front panel outlet Wall Wart Spacing Indicator: Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters